• Becoming a contributing member to Rock Krawler gives you these additional benefits.

    * A Custom Rock Krawler Icon Under Your Name.
    * A Custom Title Under Your Name.
    * Ability to Upload Avatars.
    * Ability to Post Attachments.
    * Can have 500 Private Messages.
    * Participate in Rock Krawler Member Giveaways.
    * Supporting a Great and growing Site.

    To become a RK Contributor, click here http://www.rockkrawler.org/payments.php



Well-known member
Aug 3, 2013
So I picked up this 13 gallon air tank to use as a onboard air setup,

Along with my vivair 380c 100%duty cycle compressor

With the limited #of ports in the tank I got a bit creative with part selection. I ordered the normal stuff like the 180/150 off/on pressure switch

The 200psi safety valve and drain valve

Then I plan on plumbing the compressor to the distribution block and the block to the tank since the block has 6 ports one is for the compressor, one is for the safety, one is for the pressure switch,one is from the block to the tank, and the other 2 ports are for liknes to front and rear.

I also have a liquid filled pressure gauge mounted directly to the tank. I'll get more pictures of the routing and electrical setup. And it will be placed in the lot liZard since that will need work constantly.

Sent from my XT1650 using Tapatalk


Staff member
Jul 8, 2013
[hijack] everytime I see the pics with the red paint on the floor, I think you are bleeding out [/hijack]



Well-known member
Aug 3, 2013
Got it all assembled but then I parted out the zj, so it is in a corner of my garage hidden from sight at the moment. Getting bridget the midget up and going us priority #1 at the moment

Sent from my SM-N960U using Tapatalk